Navigation

Doctoral Candidates

Mena Abdelmalek

Digital twin scenarios to optimize opto-biomechatronic processes for biomedicine and digital augmented simulations

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Michael Altenhoff

Characterization of nanoparticle aggregates by combination of two-dimensional elastic light scattering and laser-induced incandescence

Lehrstuhl für Technische Thermodynamik
Universität Erlangen-Nürnberg

Simon Aßmann, M. Sc.

Investigation of Sooting Flames by Laser Diagnostics

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Leo Bahr, M. Sc.

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Daniel Bassing

Optical Investigations into microscale inhomogeneities in compressed Fluids: the SAS process

Lehrstuhl für Prozessmaschinen und Anlagetechnik
Universität Erlangen-Nürnberg

Florian Bauer, M. Sc.

Investigation of Soot Precursors by Optical Methods

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Francisco Bioucas, M. Sc.

Effective Thermal Conductivity of Dispersions with a Liquid Continuous Phase in Chemical and Energy Engineering

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Jonas Bollmann, M. Sc.

Fluid Thermometry for the Investigation and Optimization of Hydrogen Release from LOHC Materials

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

David Botello-Payro

Hydrodynamical Optimization of Propeller-mixers for the Use in Wastewater Treatment Plants

Phillipp Bräuer, M. Sc.

Investigation of complex systems by Raman Spectroscopy

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Anton Classen

Multiphotoninterference of Light Sources in 2D and 3D

Chris Conrad, M. Sc.

Investigation of the Momentum Flux Distribution and Flow Field of GDI-Sprays by Means of Optical Measurement Instrumentation

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Nataliia Fedorova, M. Sc.

Development of novel solutions aiming to increase thequality and quantity of the regenerated thermal energy from the flue gases by the increase of the water vapordew point temperature

Department of Chemical and Biological Engineering
Chair of Fluid Mechanics

Peter Fendt, M. Sc.

Multiparameter-Verbrennungsdiagnostik mittels Superkontinuum-Absorptionsspektroskopie

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Alexandre Flügel

Experimental and theoretical Analysis of Spray and Soot formation

Siemens AG
Abteilung Gasturbinen

Medhanie Tesfay Gebrekidan

SERDS for Diagnostics in Proecess- and Biomedical Engineering

Lehrstuhl für Technische Thermodynamik
Universität Erlangen-Nürnberg

Ellen Hertle, M. Sc.

Laser-induced Phosphorescence for Gas-phase Thermometry

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Ubaya Higgoda, M. Sc.

Investigation of Thermophysical Properties of Pure and Binary Gas Mixtures Using Molecular Dynamics (MD) Simulation

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Marika Izydor

Optical in-situ monitoring of cells under high pressure conditions

Lehrstuhl für Prozessmaschinen und Anlagetechnik
Universität Erlangen-Nürnberg

Chathura Kankanamge, M. Sc.

Characterization of Molecular Diffusion in Electrolytes by Dynamic Light Scattering (DLS) and Molecular Dynamics (MD) Simulations

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Katrin Kelm

Development of an Improved Pump Head Design with Early Detection of Sedimentation for Hydrotransport

Manuel Kerscher, M. Sc.

Characterization of Liquid Organic Hydrogen Carriers by Using Surface LIght Scattering Raman Spectroscopy and Molecular Dynamics Simulations

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Tobias Klein, M. Sc.

Transport and Equilibrium Properties of Liquids with Dissolved Gases using Experiments and Molecular Dynamics (MD) Simulations

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Matthias Knoll, M. Sc.

Characterization of Heterogeneous Systems by Dynamic Light Scattering (DLS)

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Matthias Kögl, M. Sc.

Analysis of Sooting Combustions at IC-engine Conditions Using Laser Based Techniques

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Max Köppel, M. Sc.

Fiber Optic Sensors

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Markus Labus, M. Sc.

Development of Two-line Atomic Fluorescence for 2D-thermometry in the Flame Synthesis of Nanoparticles

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Bastian Lehnert, M. Sc.

High Pressure Gasoline direct Injection

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Frances Lenahan, M. Sc.

Study of Transport and Equilibrium Properties of Materials Relevant for Energy Storage and Transport by Optical Techniques and Molecular Dynamics (MD) Simulations

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Christian Mehringer

Aerosol Synthesis and Characterization of Semiconducting Nanoparticles from the Elements Si and Ge for the Application in Printable Electronics

Thomas Mehringer

Quantum-Imaging and Quantum Effects by Using Multi-Photon Interferences

Institut für Optik, Information und Photonik
Universität Erlangen-Nürnberg

Dipl.-Ing. Bettina Münsterjohann

Characterisation of Flame Spray Pyrolysis Processes by means of Optical Measurement Techniques

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Alexander Neubauer, M. Sc.

Comparison of the Primary Breakup and the Mixture Formation of Gas and Dieses Jets for Developing a Diffusive Gas Combustion Method

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Natascia Palazzo

Effect of Additives on Soot Formation from Diesel Fuel by Optical Diagnostic Techniques

Julian Perlitz, M. Sc.

Optical Investigation of Microscaled Systems

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Maximilian Piszko, M. Sc.

Analysis of the applicability of dynamic light scattering for the simultaneous determination of thermal and mutual diffusivities

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Marc-Oliver Pleinert

Investigation of Fundamental Aspects of Quantum Optics

Institute of Optics, Information and Photonics
Professur für Experimentalphysik (Prof. Dr. von Zanthier)

Alexandra Popp

Quantenrauscheigenschaften in optischen Verstärkern

Max-Planck-Insitut für die Physik des Lichts

Ulrich Retzer, M. Sc.

Mixture Formation Analysis Using Laser Induced Fluorescence

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Tim Russwurm, M. Sc.

Pre-chamber Ignition Systems for Diluted Combustion Processes

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

M. Sc. Dominik Schneidereit

Engineering of an Optical Chamber for Real-Time Two-Photon Excitation Microscopy under High Hyberbaric Conditions in Living Cells

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Simon Stehle

Raman Spectroscopic Investigaton in Surfactant Free Microemulsions Using Microfluidic Devices

Universität Erlangen-Nürnberg

Thomas Steigerwald

Equipment and Spectroscopic in situ Investigations

Lehrstuhl für Prozessmaschinen und Anlagentechnik
Universität Erlangen-Nürnberg

Hannah Ulrich, M. Sc.

Fluorescence spectroscopy

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

M. Sc. Cornelia Voigtländer

Mitosis in the Human Malaria Parasite Plasmodium Falciparum - Starting Points for New Antimalarials Based on Optical Screening Technologies

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Lukas Weiß, M. Sc.

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Richard Welß

Investigation of Spray Propagation and Mixture Formation in Optical Accessible Engines

Lehrstuhl für Technische Thermodynamik
Universität Erlangen-Nürnberg

Wenchang Wu, M. Eng.

Study of Transport Properties of Fluids by Laser Light Scattering Techniques

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Lisa Ackermann, M. Sc.

Beam Shaping for Laser Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Bhrigu Ahuja

Feasibility of powder mixtures for Laser Beam Melting process

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Dominic Bartels, M. Sc.

Development of a Systematic Approach for the Evaluation of Additive Manufacturing Potentials in Industry

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Michael Bergler, M. Sc.

Tomography of Femtosecond Laser Structured Objects Inscribed in Glass

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Silvana Burger, M. Sc.

Analysis of Laser Remote Fusion Cutting

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Pablo Dilger, M. Sc.

Determination of a Process Control Based on Gemometrical Features of the Process Zone in Laser Deep Penetration Welding

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Michael Dobler

Thermophysical and fluiddynamic modelling and simulation of laser brazing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Markus Döring, M. Sc.

Numerical and Experimental Examination of the Behaviour of Eutectic Aluminium-Nickel Alloys Relating Additive Manufacturing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Eric Eschner, M. Sc.

Adaption of Computationally Intensive Process Observartion Techniques to Industrial Applications

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Michael Förthner

Planar Bragg-grating Sensors Based on Hybrid Polymers - First Investigations and Realization

Matthias Gehring, M.Sc.

Simulation of Laser Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Benjamin Haas, M.Sc.

Laser Pulse Shaping for Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Jan Frederik Hagen, M. Sc.

Simulation of Laser Materials Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Johannes Heberle

Ultra-short pulsed processing of biopolymers

Dipl.-Ing. Oliver Hentschel, M. Sc.

Analytical and experimental investigation to laser micro-cladding of metallic powders

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Florian Huber, M. Sc.

Additive Manufacturing of Metals

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Tom Häfner

Influences of Multi-pulse Effects on Ultrashort Laser Based Microstructuring of Steel Alloys

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Michael Karg

Lokale Gefügeeinstellung von Aluminium-Legierungen im selektiven Laserstrahlschmelzen

Dipl.-Phys. Stefanie Kohl

Thermomechanical and fluiddynamical interactions in laser deep penetration welding

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Tobias Kolb

Industrialisation of Additive Manufacturing: Selective Laser Welding

Sebastian-Paul Kopp

Efficient additive manufacturing of multi-material components

Bavarian Laser Center

Stephan Rapp

Pump-probe Investigations Reveal the Ultra-Short Laser Ablation Mechanism of Dielectrics and Semiconductors

Laserzentrum der Hochschule Muenchen

Michael Rasch, M. Sc.

In-situ Analysis of the formation of alloy during laser welding

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Richard Rothfelder, M. Sc.

Additive manufacturing of tool steel powders with nanoparticulate additives

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Marie-Luise Röhricht

Transmission Laser Welding of Plastics

Bavarian Laser Center

Christian Scheitler

Manufacturing of metal components with a complex surface geometry and a 3-dimensional distribution of varying metals according to the expected mechanical, thermal and/or chemical stress through laser

Thomas Schuffenhauer

Process-adapted Optical Characterization of Polymer Powders for Selective Laser Printing

Bavarian Laser Center

Karen Schwarzkopf, M. Sc.

Quality Assurance and Process Control in Laser Materials Processing by Means of Optical Coherence Tomography

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Alexander Sommereyns (Blasczyk), M. Sc.

Analytical and Experimental Investigation of Nanocomposite Powders for Additive Manufacturing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Tobias Staudt, M. Sc.

Koordinator Lehre

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Stefan Stein

Laser drop on demand bonding of piezo actuators

Bayerisches Laserzentrum GmbH

Johannes Strauß

Korrektion aberrierter Wellenfronten bei der UKP-Bearbeitung

Felix Tenner

Process monitoring with 3D High Speed Cameras

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Johannes Vetter, M.Eng.

Evaluation of Mechanical Properties and Microstructure of FDM Processed Metals

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Thomas Will, M. Sc.

Qualification of optical coherence tomography for the process control of laser deep penetration welding

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Alexander Wittmann, M.Sc.

Direct Laser deposition of PEEK for medical applications

Institute of Photonic Technologies (Prof. Dr. Schmidt)

Dipl.-Ing. (FH) Maik Zimmermann

Design and assembly of micro optical and fiber optical systems

weitere mit der Universität verbundene Einrichtungen
Bayerisches Laserzentrum GmbH (BLZ)

Chen Chen

Developing a High Resoluton Biosensor Monitoring Capilary Density Pattern Based on Fiber Optic Spectroscopy

Ying-Jen Chen

Real time detection of Apoptosis in Engineered Tissue using a Label-free Optical Microchip Biosensor

Ashwathama Dilipkumar

Multi-Photon Based Handehld Endoscopic Device for Diagnosis of Inflammatory Bowel Diseases

Lehrstuhl für Medizinische Biotechnologie
Universität Erlangen-Nürnberg

Zijia Guo, M. Sc.

Low Contrast C-arm CT Imaging

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Kristin Hartmann, M.Sc.

OvoMate - Development of an opto-biomechatronics xenograft bioreactor for oncological drug screening

Department of Chemical- and Biological Engineering
Chair of Medical Biotechnology

Dipl.-Phys. Martin Hohmann

Design of a video endoscope in combination with a hyper spectroscope for cancer detection

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Dipl.-Ing. Bernhard Höher

Optimized imaging optics for a digital Fundus Camera

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

M. Sc. Lucas Kreiß

Label-free Optical Technologies for Tissue Diagnostics

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Benjamin Lengenfelder, M. Sc.

Photoaccoustic Imaging Using Speckle Based Remote Vibration Sensing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Fanuel Andemariam Mehari

Laser Induced Breakdown Spectroscopy (LIBS) for Tissue Differentiation and Cancer Detection

M. Sc. Paul Ritter

Engineering of Combined Optical Technolgies into Bioreactor Environments for Live Tissue Monitoring in Biomechatronics Applications for Medicine

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

M. Sc. Ulrike Schöler

Optical Sensing of Cardiovascular Mechanotransduction in Isotropic Stretch Conditions

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Moritz Späth, M. Sc.

Optical Imaging Methods in Medicine

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Oana-Maria Thoma

Aging and Scenescence of the Adaptive Immune System in Colorectal Cancer

Department of Medicine 1
Chair of Medicine I (Prof. Dr. Neurath)

Benedikt Beck, M. Sc.

Flexible Fiber-Laser

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Matthias Bär, M. Sc.

Transversial Inhomogeneous Fiber Bragg Grating for Optical Communication and Sensing

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Sourav Chatterjee

Experimental Investigation of Quantum Information Protocols

Max-Planck-Institut for the Science of Light
Division Leuchs

Kevin Jaksch

Novel Protocols in Free Space Quantum Key Distribution

Max-Planck-Institut für die Physik des Lichts

Alexander Otterpohl

Whispering Gallery Mode Resonators

Max-Planck-Institut for the Science of Light
Division Leuchs

Lalitha Pakala, M. Sc.

Signal Processing for High Speed Optical Communications

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Alfredo Rolando Rueda Sánchez

Quantum Electro Optics in Whispering Gallery Mode Resonators

Muhammad Abdullah Tariq Butt

Microscopy and Nano optics

Max-Planck-Institut für die Physik des Lichts
Division Leuchs

Sabine Dobmann

Untersuchung von Nanostrukturen mit fokussiertem Licht

Max-Planck-Institut für die Physik des Lichts

Bernd Doll

Quantiative Daylight EL of Silicon Solar Cells

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Natalia Gneiding

Coupling mechanisms in nanostructured metamaterials

Yakun He

Soliton-processed Small Molecules Solar Cells Based on Non-Fullerance Acceptors

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Johannes Hepp

Development of visualization and quantification techniques of local material failures in PV

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Huiying Hu, M. Sc.

Engineering stable perovskite-based light converting composites for lighting and display application

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Arian Kriesch

Wave propagation in plasmonic waveguide arrays

Voith Paper GmbH & Co. KG

Chao Liu

Designing Novel n-Type Water/alcohol Soluble Conjugated Electrolytes of Organic and Hybrid Photovoltaic Applications

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

M. Sc. Anna-Lena Merten

Further development of a stage for isotropic cell stretching with included optics and integration thereof in an automated bioreactor (Ospin ®) for investigation and cultivation of systems from hollow organ tissue

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Daniel Ploß

Investigations on resonant optical nanostructures for plasmonic waveguides

Lehrstuhl für Experimentalphysik (Optik)
Universität Erlangen-Nürnberg

Stefan Richter

Improvement of the Timing Resolution of Single Photon Detection

Institute of Optics, Information and Photonics
Professur für Experimentalphysik (Prof. Dr. von Zanthier)

Osbel Almora Rodríguez

Characterization of Dynamic Response of Thin Film Solar Cells

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Xiaofeng Tang

Spectral and Electrical Study of Solution-Processed Semiconductors

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Albert These, M. Sc.

Doktorand, Forschungsgruppe TSC (Transport in Solution-Processed Semiconductors, i-MEET)

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Heyi Zhang, M.Sc.

The Growth of Crystalline Perovksite Layers

Department of Material Science and Engineering
Chair of Materials for Electronics and Energy Technology

Attila Budai, M. Sc.

Blood Vessel Segmentation and Analysis in Eye Fundus Images

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Marco Bögel, M. Sc.

Perfusion Imaging

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Dipl.-Inf. Eva Eibenberger

Explicit Skin Reflectance Modeling for Improved Skin Detection and Illumination Color Estimation

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Simone Gaffling, M. Sc.

3-D Retrospective Microscopy

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Tobias Geimer, M. Sc.

Real-time Multi-modal Respiratory Motion Tracking and Modeling for Radiation Therapy

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Tristan Gottschalk, M. Sc.

Deep Learning-based Cone-Beam Reconstruction Method for the Reduction of Image Artifacts like MAR

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Julian Hornich, M. Sc.

Optical Simulation of Plasmonic Effects in Organic Solar Cells

Department of Computer Science
Chair of Computer Science 10 (System Simulation)

Julian Hoßbach, M. Sc.

AI Based Retrospecitve Motion Correction in MRI

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Shiyang Hu, M. Sc.

Dark-field Reconstruction

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Florian Kordon, M. Sc.

Deep Learning based Segmentation and Landmark Detection on X-ray Images for Trauma Surgery

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Phillip Rall, M. Sc.

Beam Propagation and Thermal Lensing

Department of Computer Science
Chair of Computer Science 10 (System Simulation)

Maximilian Reymann, M. Sc.

Improving Multi-Modal Quantitative SPECT with Deep Learning Approaches to Optimize Image Reconstruction and Extraction of Medical Information

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Philipp Roser, M. Sc.

Approaches for Workflow Optimization and Reduction of Radiation Exposure in the Interventional Suite and Hybrid OR

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Raimund Schneider

Isotope Determination by measuring Temporal Correlations of Gamma Photons of Radioactive Decays

Ramon Springer, M. Sc.

Simulation of Solid State Amplifiers for Ultrashort Laser Pulses

Department of Computer Science
Chair of Computer Science 10 (System Simulation)

Jens Wetzl, M. Sc.

Speedup and Extension of Iterative Image Reconstruction Methods for Cardia Magnetic Resonance Imaging

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Jan Winter

Time-resolved Pump-probe Ellipsometry and Simulation of the Laser-Induced Optical Dynamic in Metals at Laser Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)