Doctoral Candidates

Iurii Datii, M. Sc.

Multi-wavelength intensity interferometry in astronomy

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Optics, Information and Photonics

Kevin Jaksch

Novel Protocols in Free Space Quantum Key Distribution

Max Planck Institute for the Science of Light

Kilian Scheffter, M. Sc.

Stimulated Raman Fieldoscopy

Friedrich-Alexander-Universität Erlangen-Nürnberg
Max Planck Institute for the Science of Light

Max Kieker, M. Sc.

Stimulated Raman fieldoscopy at visible with high spetiotemporal resolution

Friedrich-Alexander-Universität Erlangen-Nürnberg
Max Planck Institute for the Science of Light

Michael Küblböck, M. Sc.

Enhancing Solid-State Laser Performance via Renewable Solar Energy and Radiative Cooling

Friedrich-Alexander-Universität Erlangen-Nürnberg
Max Planck Institute for the Science of Light

Pragya Sharma, M. Sc.

Femtosecond Fieldoscopy at visible frequencies

Friedrich-Alexander-Universität Erlangen-Nürnberg
Max Planck Institute for the Science of Light

Sourav Chatterjee

Experimental Investigation of Quantum Information Protocols

Max Planck Institute for the Science of Light
Leuchs Division

Soyeon Jun, M. Sc.

Label-free spectro-microscopy of soft matter

Max Planck Institute for the Science of Light
Fattahi Research Group

Stefan Richter, M.Sc.

Improvement of the Timing Resolution of Single Photon Detection

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Optics, Information and Photonics

Steffen Gommel, M.Sc.

Photonic Time-Stretch Fieldoscopy

Max Planck Institute for the Science of Light
Fattahi Research Group

Abdus Saboor, M. Sc.

High-Throughput “Green” Synthesis of Indium- and Tin-based Multinary Chalcogenide and Perovskite Nanocrystals for Light Conversion Applications

Universität Erlangen-Nürnberg
Department of Materials Science and Engineering

Albert These, M. Sc.

Doktorand, Forschungsgruppe TSC (Transport in Solution-Processed Semiconductors, i-MEET)

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Alex Muthumbi, M. Sc.

Diffuse Light Scattering Simulation, Design and Measurement for LiDAR Test Systems

Universität Erlangen-Nürnberg
Lehrstuhl für Hochfrequenztechnik

Andreas Rittler, M. Sc.

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Anni Li, M. Sc.

Optical parametric amplifier for gas sprectroscopy

Universität Erlangen-Nürnberg
Max Planck Institute for the Science of Light

Benedikt Beck, M. Sc.

Flexible Fiber-Laser

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Brhanu Kahsay Areaya, M. Sc.

Distributed fiber optic sensor using higher order modes and fiber bragg grating

Universität Erlangen-Nürnberg
Lehrstuhl für Hochfrequenztechnik

Chaohui Li, M. Sc.

Preparation of efficient and stable p-i-n perovskite solar cells

Universität Erlangen-Nürnberg
Institute Materials for Electronics and Energy Technology

Elshaimaa Darwish, M. Sc.

Novel Perovskite nanomaterials for photovoltaics and optoelectronic applications

Universität Erlangen-Nürnberg
Institute Materials for Electronics and Energy Technology

Ernst Wittmann, M. Sc.

Observation and analysis of monitoring data from solar panels

Lehrstuhl für Werkstoffwissenschaften
iMeet

Heyi Zhang, M.Sc.

The Growth of Crystalline Perovksite Layers

Department of Material Science and Engineering
Chair of Materials for Electronics and Energy Technology

Hui Huang, M. Sc.

Interfacial layer design for single-juction or tandem solar cells

Universität Erlangen-Nürnberg
Lehrstuhl für Materialien der Elektronik und der Energietechnologie

Jingjing Tian, M. Sc.

Development of highly efficient and stable wide-bandgap perovskite solar cells for tandem applications

Department of Materials Science and Engineering
Chair of Materials for Electronics and Energy Technology

Johannes Reichstein, M. Sc.

Innovatives und universelles Testsystem für Automotive LiDAR Sensoren zur Funktionsprüfung und Kalibrierung im Entwicklungs- und Produktionsprozess (LiSeT - Lidar Sensor Testsystem)

Universität Erlangen-Nürnberg
Institute of Microwaves and Photonics

Lirong Dong, M. Sc.

Interface engineering towards fully printed perovskite solar cells and modules

Department Werkstoffwissenschaften
Lehrstuhl für Werkstoffwissenschaften (Materialien der Elektronik und der Energietechnologie)

Dr.-Ing. Matthias Bär

Transversial Inhomogeneous Fiber Bragg Grating for Optical Communication and Sensing

Department of Electrical-Electronic-Communication Engineering
Institute of Microwaves and Photonics (LHFT)

Mingjie Feng, M. Sc.

Preperation of perovskite single crystals by spatial confinement method

Department Werkstoffwissenschaften (WW)
Lehrstuhl für Werkstoffwissenschaften (Materialien der Elektronik und der Energietechnologie)

Mohammad Sahil, M.Sc.

Multi-parameter sensing with Flying particle sensor

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Microwaves and Photonics

Philipp Schmidt, M. Sc.

Optische Manipulation von Mikropartikeln im Hohlkern einer photonischen kristallfaser durch Orbital-Angular-Momentum Moden für Anwendungen in der Fasersensorik

Universität Erlangen-Nürnberg
Institute of Microwaves and Photonics

Qizhen Song, M. Sc.

Study emergent PV stability by machine learning

Universität Erlangen-Nürnberg
Institute Materials for Electronics and Energy Technology

Rong Wang, M.Sc.

Understanding the Donor-Acceptor interface influence on the performance of organic solar cells

iMeet
Lehrstuhl für Werkstoffwissenschaften

Souryadeep Saha, M. Sc.

Department of Computer Science Chair of Computer Science 10 (System Simulation)

Alexander Fenk, M. Sc.

Data assimilation and adjoint state estimation for unsteady reactive flows

Universität Erlangen-Nürnberg
Lehrstuhl für Technische Thermodynamik

Alexander Rieschl, M. Sc.

Additive In Situ Manufacturing of HEA/MEAs Using DED-LB/M

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Alexander Romboy, M. Sc.

Non-linear beam shaping of ultrashort laser pulses

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Alexander Wittmann, M.Sc.

Direct Laser deposition of PEEK for medical applications

Institute of Photonic Technologies (Prof. Dr. Schmidt)

Andreas Maier, M. Eng.

Tailoring material properties of duplex stainless steel by in-situ alloying and Laser Directed Energy Deposition of matels

Universität Erlangen-Nürnberg
Bayerisches Laserzentrum GmbH

Bara'a Al-khateeb, M. Sc.

Dropwise condensation heat transfer of fluids with low surface tension

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Dr.-Ing. Bastian Lehnert

High Pressure Gasoline direct Injection

Department of Chemical and Biological Engineering
Professur für Fluidsystemtechnik (FST)

Bastian Rüppel, M. Sc.

Investigation of energy conversion processes using Raman scattering

Universität Erlangen-Nürnberg
Department Chemie- und Bioingenieurwesen (CBI)

Benjamin Haas, M.Sc.

Laser Pulse Shaping for Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Benjamin Klevansky, M. Sc.

Droplet Characterization by Optical Techniques

Lehrstuhl für Technische Thermodynamik (LTT)

Bettina Münsterjohann

Characterisation of Flame Spray Pyrolysis Processes by means of Optical Measurement Techniques

Carola Forster, M. Sc.

Thermo-fluid dynamic investigation and modelling of melt pool in laser beam welding

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Chathura Kankanamge, M. Sc.

Characterization of Molecular Diffusion in Electrolytes by Dynamic Light Scattering (DLS) and Molecular Dynamics (MD) Simulations

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Christopher Kowis, M. Sc.

Wasserstoffeinblasung in Großmotoren

Universität Erlangen-Nürnberg
Professur für Fluidsystemtechnik

Daniel Nettelbeck, M. Sc.

Experimental and Model-Based Investigation of Energy and Temperature Distribution in Laser-Based Directed Energy Desposition of Thermoplastic Polymers using PA12 and PEEK with a Thulium Fiber Laser

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Dena Mombeini, M. Sc.

Characterization of Dispersions by photon Correlation and Conventional Techniques

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Eric Eschner

Adaption of Computationally Intensive Process Observartion Techniques to Industrial Applications

Fabian Lorig, M. Sc.

Experimental investigation of viscosity, interfacial tension, and thermal conductivity of oil-refrigerant mixtures by light scattering and conventional techniques

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Florian Huber

Additive Manufacturing of Metals

Florian Kohlmann, M. Sc.

Wissenschaftlicher Mitarbeiter

Universität Erlangen-Nürnberg
Professur für Fluidsystemtechnik

Florian Nahr, M. Sc.

Influence of Beam Profiles and Scan Strategies on the Processing of Metals in PBF-LB

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Frances Lenahan

Study of Transport and Equilibrium Properties of Materials Relevant for Energy Storage and Transport by Optical Techniques and Molecular Dynamics (MD) Simulations

Francisco Bioucas, M. Sc.

Effective Thermal Conductivity of Dispersions with a Liquid Continuous Phase in Chemical and Energy Engineering

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Frank Wittmann, M. Sc.

Optische Untersuchungen zu Vorkammern und Vorkammerzündung

Universität Erlangen-Nürnberg
Professur für Fluidsystemtechnik

Hannah Ulrich

Fluorescence spectroscopy

Hubert Blabus, M. Sc.

Transport and Equilibrium Properties of Working Fluids for Hydrogen Technology by Optical and Conventional Techniques

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Ibrahim Marouf, M. Sc.

Efficiency Analysis of ultraviolet Light Emitting Diodes

Universität Erlangen-Nürnberg
Department Elektrotechnik-Elektronik-Informationstechnik (EEI)

Jan Winter

Time-resolved Pump-probe Ellipsometry and Simulation of the Laser-Induced Optical Dynamic in Metals at Laser Material Processing

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Johannes Heberle

Ultra-short pulsed processing of biopolymers

Johannes Vetter, M.Eng.

Evaluation of Mechanical Properties and Microstructure of FDM Processed Metals

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Jonas Bollmann

Fluid Thermometry for the Investigation and Optimization of Hydrogen Release from LOHC Materials

Jonas Wolter, M.Sc.

Development and characterisation of recyclable wood-polymer composites for powder bed-based additive manufacturing

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Photonic Technologies (LPT)

Jonathan Wenk, M.Sc.

Investigation of the sintering kinetics of gas-borne nanoparticles on short time scales

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Engineering Thermodynamics (LTT)

Julian Perlitz

Optical Investigation of Microscaled Systems

Julian Schrauder, M. Sc.

Contour and surface optimization in laser-based powder bed fusion (PBF-LB/M) via beam shaping in the application field of hydrogen burner nozzles

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Julius Jander, M.Sc.

Investigation of liquid organic hydrogen carriers by Raman Spectroscopy

Lehrstuhl für Advanced Optical Technologies - Thermophysical Properties
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Julius Kühl, M. Sc.

Heat Transfer in Condensation of Binary Hydrocarbon Mixtures on Smooth and Finned Tubes as well as Tube Bundles

Department of Chemical and Biological Engineering (CBI)
Institute of Advanced Optical Technologies - Thermophysical Properties

Karen Schwarzkopf, M. Sc.

Quality Assurance and Process Control in Laser Materials Processing by Means of Optical Coherence Tomography

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Kevin Sohn, M. Sc.

Laser-ultrasonic non-destructive testing

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Kisal Senadeera, M.Sc.

Characterization of different fluid mixtures consisting of liquids with dissolved gases by the determination of their thermophysical properties

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties (AOT-TP)

Leonard Plutz, M. Sc.

Grundlagenuntersuchung chipnahes Laserschweißen in Powermodulen/ Basic investigation of near-chip laser welding in power modules

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Leonie Düfert, M. Sc.

Untersuchungen zum kombinierten Prozess aus DED-LB/M und Umformung

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Lukas Weiß

Manuel Kerscher

Characterization of Liquid Organic Hydrogen Carriers by Using Surface LIght Scattering Raman Spectroscopy and Molecular Dynamics Simulations

Marcel Müller, M. Sc.

Development of tomographic methods to investigate soot formation in turbulent combustion processes

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Marcel Stephan, M. Sc.

Untersuchung der Potentiale der Strahlformung beim Laserpulverauftragschweißen

Bayerisches Laserzentrum

Markus Döring, M. Sc.

Numerical and Experimental Examination of the Behaviour of Eutectic Aluminium-Nickel Alloys Relating Additive Manufacturing

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Markus Labus

Development of Two-line Atomic Fluorescence for 2D-thermometry in the Flame Synthesis of Nanoparticles

Matthias Zutt, M. Sc.

Contacting of charged battery cells

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Maximilian Marschall, M.Sc.

Evolution of Optical Properties of Polymer Powder During PBF-LB/P process and heat influence

Bayerisches Laserzentrum

Maximilian Piszko

Analysis of the applicability of dynamic light scattering for the simultaneous determination of thermal and mutual diffusivities

Maximilian Stabroth, M.Sc.

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Michael Altenhoff

Characterization of nanoparticle aggregates by combination of two-dimensional elastic light scattering and laser-induced incandescence

Lehrstuhl für Technische Thermodynamik
Universität Erlangen-Nürnberg

Michael Rasch

In-situ Analysis of the formation of alloy during laser welding

Mikhail Vassilyev, M.Sc.

Characterization of nanoparticles from a bipolar electrospray using optical measurement techniques

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Engineering Thermodynamics (LTT)

Muhammad Saad Idrees, M. Sc.

Fundamental Research on the heat transfer between workpiece and tool during press hardening

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Neda Sanchouli, M. Sc.

Moderating effects of alcohols on interfacial tensions in multiphase systems consisting of carbon dioxide and organic solvents

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Nicolai Schneider, M. Sc.

Localized electron-induced laser absorption (LEILA)

Universität Erlangen-Nürnberg
Institut of Photonic Technologies LPT

Oliver Hentschel

Analytical and experimental investigation to laser micro-cladding of metallic powders

Patrick Schmidt, M.Sc.

Development of the Shadowgraph Method for the Routine Determination of Mutual Diffusivities in Binary Mixtures Relevant for Process Engineering

Lehrstuhl für Advanced Optical Technologies - Thermophysical Properties
Department of Chemical and Biological Engineering

Pedro Martinez Gonzalez, M.Sc.

Surface light scattering for non-transparent fluids

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties (AOT-TP)

Peter Fendt

Multiparameter-Verbrennungsdiagnostik mittels Superkontinuum-Absorptionsspektroskopie

Peter Lang, M.Sc.

Optical Study of flame spray pyrolysis for gas phase synthesis of nanoparticles

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Phillipp Bräuer, M. Sc.

Investigation of complex systems by Raman Spectroscopy

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Pranay Kumar Chittem, M. Sc.

Characterization of working materials with relevant for process engineering by optical techniques

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Richard Rothfelder, M. Sc.

Additive manufacturing of tool steel powders with nanoparticulate additives

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Sebastian Faderl, M.Sc.

Optical diagnostics of hydrogen combustion using additively manufactured burners

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Engineering Thermodynamics (LTT)

Silvana Burger

Analysis of Laser Remote Fusion Cutting

Simon Aßmann, M. Sc.

Investigation of Sooting Flames by Laser Diagnostics

Department of Chemical and Biological Engineering
Institute of Engineering Thermodynamics (Prof. Dr. Will)

Simon Leupold, M. Sc.

Dispersion effects of nanocomposites to improve melting and resolidification behavior during PBF-LB/P with near-infrared diode lasers

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Stefan Buchstaller, M. Sc.

Development and application of a new optical measurement technique based on elastic light scattering

Friedrich-Alexander University Erlangen-Nürnberg
Lehrstuhl für Technische Thermodynamik (LTT)

Stefanie Kohl

Thermomechanical and fluiddynamical interactions in laser deep penetration welding

Sukrati Gupta, M.Sc.

Characterization of Solubilities and further Equilibrium Properties of systems relevant for energy and process engineering by conventional and optical techniques

Friedrich-Alexander-Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties (AOT-TP)

Sven Ackermann, M.Sc.

Additive Manufacturing of Metals

Department of Mechanical Engineering
Institute of Photonic Technologies (Prof. Dr. Schmidt)

Thomas Lang, M.Sc.

Influencing melt dynamics in Remote Fusion Cutting

Friedrich-Alexander-Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Thomas Will

Qualification of optical coherence tomography for the process control of laser deep penetration welding

Tim Russwurm

Pre-chamber Ignition Systems for Diluted Combustion Processes

Tobias Staudt

Sensing and High-speed Process Monitoring in Laser Beam Welding

Vadim Medvedev

The process control for laser-based additive manufacturing of polymers

Bavarian Laser Center

Wenchang Wu

Study of Transport Properties of Fluids by Laser Light Scattering Techniques

Yongzhen Sun, M. Sc.

Characterization of working fluids relevant for hydrogen storage and transport by optical metrology

Universität Erlangen-Nürnberg
Institute of Advanced Optical Technologies - Thermophysical Properties

Ziwen Zhai, M. Sc.

Department of Chemical and Biological Engineering
Lehrstuhl für Advanced Optical Technologies – Thermophysical Properties

Anindya Ghosh, M. Sc.

Tomographic reconstruction by machine learning assisted shifted focus imaging

Lehrstuhl für Photonische Technologien (LPT)

Anna-Lena Merten

Further development of a stage for isotropic cell stretching with included optics and integration thereof in an automated bioreactor (Ospin ®) for investigation and cultivation of systems from hollow organ tissue

Ashwathama Dilipkumar

Multi-Photon Based Handehld Endoscopic Device for Diagnosis of Inflammatory Bowel Diseases

Lehrstuhl für Medizinische Biotechnologie
Universität Erlangen-Nürnberg

Chen Chen

Developing a High Resoluton Biosensor Monitoring Capilary Density Pattern Based on Fiber Optic Spectroscopy

Cornelia Voigtländer

Mitosis in the Human Malaria Parasite Plasmodium Falciparum - Starting Points for New Antimalarials Based on Optical Screening Technologies

Dongqin Ni, M. Sc.

Investigation of ns-pumped random laser

Department of Mechanical Engineering
Institute of Photonic Technologies (LPT, Prof. Schmidt)

Edith Böhmer, M. Sc.

Calibration-free Laser-Induced Breakdown Spectroscopy (LIBS) for the elemental analysis of tissue

Friedrich-Alexander-Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Elke Jukic, M. Sc.

Contactless Photoacoustic Imaging using Speckle Analysis

Universität Erlangen-Nürnberg
Lehrstuhl für Photonische Technologien

Fanuel Andemariam Mehari

Laser Induced Breakdown Spectroscopy (LIBS) for Tissue Differentiation and Cancer Detection

Florian Kordon, M. Sc.

Deep Learning based Segmentation and Landmark Detection on X-ray Images for Trauma Surgery

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Hussein Hammoud, M. Sc.

Developement of a novel Two-Photon Light-Sheet Beam-Sweep Scanning Microscope for deep 3D Tissue Imaging

Universität Erlangen-Nürnberg
Institute of Medical Biotechnology

Jennifer Schmiss, M. Sc.

Organoid morphogenesis for tissue engineering through biomaterials design and optp-biomechatronics

Universität Erlangen-Nürnberg
Lehrstuhl für Medizinische Biotechnologie

Julian Bauer

Label-free optical maturation assessment of biofabricated tissue constructs in bioreactor environments tailored for biofabrication

Lehrstuhl für Medizinische Biotechnologie (MBT)

Lovis Schween, M. Sc.

Assembly kinetics of intermediate filament composite networks

Lehrstuhl für Biophysik
Biophysics Group

Mena Michael

Digital twin scenarios to optimize opto-biomechatronic processes for biomedicine and digital augmented simulations

Department of Chemical and Biological Engineering
Chair of Medical Biotechnology

Mert Ergin, M. Sc.

Engineering of an advanced Opto-Biomechatronics Bioreactor System for Adaptive Tissue Decellularization and Recellularization under in-Process optical Assessment

Universität Erlangen-Nürnberg
Lehrstuhl für Medizinische Biotechnologie (MBT)

Moritz Späth

Optical Imaging Methods in Medicine

Lehrstuhl für Photonische Technologien (LPT, Prof. Schmidt)

Tobias Geimer, M. Sc.

Real-time Multi-modal Respiratory Motion Tracking and Modeling for Radiation Therapy

Department of Computer Science
Chair of Computer Science 5 (Pattern Recognition)

Ulrike Schöler

Optical Sensing of Cardiovascular Mechanotransduction in Isotropic Stretch Conditions